+ Reply to Thread
Page 1 of 8 123 ... LastLast
Results 1 to 10 of 87

Thread: "1290" Class M Hard Multi Chine Hull

Hybrid View

  1. #1
    Join Date
    Apr 2005
    Location
    Toulouse (Fra)
    Posts
    3,283

    Default "1290" Class M Hard Multi Chine Hull

    The Springtime is coming !

    Is time for me to return to the Models construction after almost 1 year stoppage due to recovery from hernia operation.

    A lot of thinking and discussions about pros and cons for hard chine hull performances.
    I just drawn a new plan for a Class M and there is only one way to verify it.
    Here the picture about.

    Among this design, it happen to discover various painting decorations methods, like "stretch adhesive film" often used for car body, "Hydrographical paint" with plenty of subjects and "Swirling paint", my preferred.
    On You Tube plenty of demonstrations simply using above key words.

    The M picture is the result of a screen shot made on one of YouTube short film.

    Claudio

    Just a link out of many : https://youtu.be/nAmvavELsFw
    Attached Thumbnails Attached Thumbnails Click image for larger version

Name:	M-Chine 5P 0.jpg‎
Views:	181
Size:	492.0 KB
ID:	15965  
    Last edited by claudio; 02-19-2017 at 11:25 AM.

  2. #2
    Join Date
    Apr 2005
    Location
    Toulouse (Fra)
    Posts
    3,283

    Default Re: "1290" Class M Hard Multi Chine Hull

    It may be of interest to watch this video : https://youtu.be/_CA0DR4GSQg.
    I will build my basin with glass-epoxy 150/160x50x50cm to dip the M hull

  3. #3
    Join Date
    Jun 2012
    Location
    Portland, Tennessee, USA
    Posts
    21

    Default Re: "1290" Class M Hard Multi Chine Hull

    What a fantastic way to paint a hull. Will look forward to seeing your progress with this concept.
    Of course you do realize that there may be many model boat builders that will now get their hands dirty with "swirl". LOL

    Glad to see you active again Claudio, I missed seeing your drawing and building activities.

    Clark

  4. #4
    Join Date
    Apr 2005
    Location
    Toulouse (Fra)
    Posts
    3,283

    Default Re: "1290" Class M Hard Multi Chine Hull

    While waiting for better weather conditions, lower RH, here a 'dual table' about Sail's & Rig Data used for a Class M model.
    Attached Thumbnails Attached Thumbnails Click image for larger version

Name:	M - Sail's Data.jpg‎
Views:	36
Size:	170.4 KB
ID:	16070  

  5. #5
    Join Date
    Apr 2005
    Location
    Toulouse (Fra)
    Posts
    3,283

    Default Re: "1290" Class M Hard Multi Chine Hull

    Since stern and bow are sealed, was a good opportunity the fill the hull with water. I used a blue pigment to get a better view although not very impressive. Filled 4085cm3 of water which is a little bit more then the 4023cm3 as per design. Considering that this volume is based upon the internal hull form, no problems. All in line with the design except that a couple of leaks are found. (second purpose to fill in water)
    Attached Thumbnails Attached Thumbnails Click image for larger version

Name:	F138.JPG‎
Views:	23
Size:	999.9 KB
ID:	16147   Click image for larger version

Name:	F139.JPG‎
Views:	22
Size:	799.9 KB
ID:	16148   Click image for larger version

Name:	F140.JPG‎
Views:	24
Size:	993.6 KB
ID:	16149   Click image for larger version

Name:	F142.JPG‎
Views:	25
Size:	554.2 KB
ID:	16152   Click image for larger version

Name:	F143.JPG‎
Views:	26
Size:	1.00 MB
ID:	16151  

    Last edited by claudio; 04-15-2017 at 12:48 PM.

  6. #6
    Join Date
    Apr 2005
    Location
    Toulouse (Fra)
    Posts
    3,283

    Default Re: "1290" Class M Hard Multi Chine Hull

    progressing, but less then I was expecting.
    Today tuning of the Jib box inside de shadows and with the peaked deck for the first time close together.
    I observed some rotating small frictions over 80 turn.
    Open the bottom of Jib Box to see what I can do. I will explain with a drawing in an other reply.

    Fairlead construction..
    Attached Thumbnails Attached Thumbnails Click image for larger version

Name:	F209.JPG‎
Views:	25
Size:	987.4 KB
ID:	16280   Click image for larger version

Name:	F210.JPG‎
Views:	24
Size:	1,021.4 KB
ID:	16281   Click image for larger version

Name:	F211.JPG‎
Views:	24
Size:	884.5 KB
ID:	16282   Click image for larger version

Name:	F212.JPG‎
Views:	23
Size:	944.7 KB
ID:	16283   Click image for larger version

Name:	F213.JPG‎
Views:	23
Size:	912.0 KB
ID:	16284  

    Click image for larger version

Name:	F214.JPG‎
Views:	27
Size:	895.5 KB
ID:	16285   Click image for larger version

Name:	F215.JPG‎
Views:	29
Size:	985.7 KB
ID:	16286   Click image for larger version

Name:	F216.JPG‎
Views:	31
Size:	912.7 KB
ID:	16287   Click image for larger version

Name:	F217.JPG‎
Views:	29
Size:	975.2 KB
ID:	16288  

  7. #7
    Join Date
    Apr 2005
    Location
    Toulouse (Fra)
    Posts
    3,283

    Default Re: "1290" Class M Hard Multi Chine Hull

    Packing tape applied, one layer only.
    Attached Thumbnails Attached Thumbnails Click image for larger version

Name:	F61.jpg‎
Views:	35
Size:	859.2 KB
ID:	16067   Click image for larger version

Name:	F62.jpg‎
Views:	38
Size:	785.9 KB
ID:	16068   Click image for larger version

Name:	F63.jpg‎
Views:	29
Size:	696.6 KB
ID:	16069  

  8. #8
    Join Date
    Apr 2005
    Location
    Toulouse (Fra)
    Posts
    3,283

    Default Re: "1290" Class M Hard Multi Chine Hull

    While waiting for a complete polymerization of previous work, I started building the mock-up for the Peaked Deck.
    Simple shape, but not easy to make unless I'm loosing my manual capacity...!! nevertheless it will look like this picture...
    Later as usual...sanding and packing tape...
    Attached Thumbnails Attached Thumbnails Click image for larger version

Name:	F137.JPG‎
Views:	13
Size:	1.12 MB
ID:	16145  

  9. #9
    Join Date
    Apr 2005
    Location
    Toulouse (Fra)
    Posts
    3,283

    Default Re: "1290" Class M Hard Multi Chine Hull

    Thanks,
    today is the 208st picture since February 2017.
    After the deception about sliding jib box weight, I changed design strategy.
    In spite of lower weight for the Savox Arm servo, I choose to go ahead with the Hitec winch. The Battery pack 2/3 AA cells of 6V-1600mA/h is also too heavy with 148g.
    The Arm Servo would have forced to reposition the bonded station and I did not liked.
    Changed central supports methods and presentation of servo winch and rear pulley at the right height before bonding.
    I'm still relying for the prototype on wood sticks, but next I could use carbon square tubes from 6x6mm to 8x8mm
    Attached Thumbnails Attached Thumbnails Click image for larger version

Name:	F208.JPG‎
Views:	35
Size:	932.2 KB
ID:	16279   Click image for larger version

Name:	F207.JPG‎
Views:	30
Size:	1.12 MB
ID:	16278   Click image for larger version

Name:	F206.JPG‎
Views:	28
Size:	1.04 MB
ID:	16277  

  10. #10
    Join Date
    Apr 2005
    Location
    Toulouse (Fra)
    Posts
    3,283

    Default Re: "1290" Class M Hard Multi Chine Hull

    Hi Clark,
    I'm just designing a basin support box that can be dismounted with the use a swim pool film. Unfortunately living in a flat I'd chosen the shower and missed the bathtub. Easy to put it back to the garage when not needed.

    Booth methods are interesting when I refers to Hydrographic painting and Swirling painting.

    For what concern the Class M model I changed from 5 to 6 panels chines because the draft and beam are smaller at 30 of heeling.
    BTW, the Hull Wet Area is very close to the one with round Hull.

    Expected more stability.

    Another simulation of swirling paint

    Cheers
    Claudio
    Attached Thumbnails Attached Thumbnails Click image for larger version

Name:	Hardchine M 6Panels.jpg‎
Views:	107
Size:	374.4 KB
ID:	15972  

+ Reply to Thread

Similar Threads

  1. Free "1290" a New Class M
    By claudio in forum Designs And Plans
    Replies: 1
    Last Post: 12-16-2016, 09:52 AM
  2. Water inside my "Sealed" hull
    By Tom the Brat in forum New Boat Owners
    Replies: 7
    Last Post: 04-08-2012, 12:07 PM
  3. New mixed class "Racing formula 100R"
    By K1W120 in forum New Classes
    Replies: 21
    Last Post: 02-11-2012, 01:17 PM
  4. How the development of "Nightmare Mk.VII+Mk.VIII" leaded to "Mk.IX+ Mk.X"!
    By disabled in forum General Discussions (MultiHull/MultiOne)
    Replies: 3
    Last Post: 03-06-2011, 11:27 AM
  5. Using Hulls to build a hard chine hull
    By Muzza in forum General Discussion
    Replies: 12
    Last Post: 01-05-2006, 12:48 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts