+ Reply to Thread
Results 1 to 8 of 8

Thread: Water inside my "Sealed" hull

  1. #1
    Join Date
    Aug 2006
    Location
    Libertyville Illinois
    Posts
    86

    Default Water inside my "Sealed" hull

    My Nirvana is gaining weight

    It's got about a pound of water sloshing around inside. It did last summer too, but had lost it by spring.

    I'm thinking about drilling a little hole in the transom and putting a little screw in it so I can drain the water out. What do you think?

  2. #2
    Join Date
    Aug 2006
    Location
    Near New Orleans
    Posts
    296

    Default

    I sail Victorias, and most people have drilled a hole in the transom and put in a rubber plug. In a breeze, they can get water inside through the various openings, even if sealed well. Drain the hull after every few races.

  3. #3
    Join Date
    Oct 2005
    Location
    Asturias, Spain
    Posts
    265
    Blog Entries
    1

    Default

    It's best not to leave the water inside the hull as the condensation can do nasty things to your Rx/servos.

  4. #4
    Join Date
    Feb 2006
    Location
    Idaho, USA
    Posts
    194

    Default

    I put a drain in the bow of my 1 Meter (similar to other boats @ my pond). A small, rigid tube at the very tip of the yacht extending 1cm above the deck.

    yar

  5. #5

    Default Maybe a sponge, or a turkey baster

    Until you get to drilling that hole, perhaps you can use a sponge on a stick...like an aquarium glass cleaning gizmo or a turkey baster. The other question you had about servos is "yes". After about the 1 meter mark, most larger boats, marblehead and up, incorporate a servo to control the jib boom seperately from the main.

  6. #6
    Join Date
    May 2007
    Location
    Vancouver Canada
    Posts
    94

    Default Re: Maybe a sponge, or a turkey baster

    Why band-aid method? seal it good with silicon sealent and she ont leak.

  7. #7
    Join Date
    Nov 2006
    Location
    Northern VA
    Posts
    1,518

    Default Re: Maybe a sponge, or a turkey baster

    in a heavy air, all my boats, from the rg up to the ec12 get water inside... I have drain holes on the rg and the victoria, the soling and ec12 I use a syringe the soling is my driest boat. probably because of the raised cockpit cover..

    if its a light air day IE no rails under water and you are getting water I wood look at rudder post or keel post.
    Marc

    S1M 1981
    Victoria 81
    RG65 181
    IOM 81, 681, 881

  8. #8

    Default Re: Maybe a sponge, or a turkey baster

    If the deck gets wet water can get pumped inside by the movement of the sheets through the deck fairleads. If you do a lot of heavy air sailing, or have a tender boat, a fairlead that rises a bit above the deck is a good idea.

    Cheers,

    Earl

+ Reply to Thread

Similar Threads

  1. Japanese Footy "ShaQ" on FOOTY website "Photos"
    By JPN-001 in forum General Discussion (Footy)
    Replies: 50
    Last Post: 07-21-2007, 12:07 PM
  2. "lajabless" Footy Ready For Production
    By nigelpheron in forum Advertisments
    Replies: 4
    Last Post: 02-08-2007, 04:09 PM
  3. "bearfoot" hull complete.
    By 420sailor in forum General Discussion (Footy)
    Replies: 3
    Last Post: 12-05-2006, 10:38 PM
  4. U.S. "Footy" Promotion & Info
    By Dick Lemke in forum General Discussion (Footy)
    Replies: 15
    Last Post: 03-02-2006, 12:34 PM
  5. "Moustache hull"
    By Manu in forum General Discussion
    Replies: 3
    Last Post: 11-08-2005, 04:48 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts